Tủ đóng cắt bọc kim loại dòng điện xoay chiều tháo lắp được bọc thép KYN61-40.5

KYN61-40.5(Z) Indoor AC high-voltage metal-armored withdrawable switchgear (hereinafter referred to as “switchgear”) is suitable for three-phase AC 50Hz power systems. It is used in power plants, substations and distribution rooms of industrial and mining enterprises to receive and distribute electrical energy, and to control, protect and monitor circuits.

Tổng quan

KYN61-40.5(Z) Indoor AC high-voltage metal-armored withdrawable switchgear (hereinafter referred to as “switchgear”) is suitable for three-phase AC 50Hz power systems. It is used in power plants, substations and distribution rooms of industrial and mining enterprises to receive and distribute electrical energy, and to control, protect and monitor circuits.

This product complies with the following standards: GB3906 “AC Metal-enclosed Switchgear for 3~35kV”, GB/T11022 “Common Technical Requirements for High Voltage Switchgear and Controlgear”, and IEC60298 “AC Metal-enclosed Switchgear and Controlgear with Rated Voltages Above 1kV and Below 50kV”.

Usage environment

1. Ambient air temperature: Maximum temperature +40℃, minimum temperature -10℃;
2. Altitude: ≤1000m;
3. Surrounding relative humidity: Daily average≤95%, monthly average≤90%;
4. Ambient air: Not suitable for places with corrosive, severe pollution, flammable gases or intense vibration.
5. In the event of an earthquake, its intensity must not exceed magnitude 8.

Technical Parameter

Mục Unit Argument
Rated voltage kV 40.5
Rated insulation level Lightning impulse withstand voltage (full wave) kV 185
Power frequency withstand voltage (1 minute) 95
Rated frequency Hz 50
Rated current A 630;1250;1600;2000
Rated short-circuit breaking current kV 20,25,31.5
Rated short-circuit closing current (peak value) kA 50,63,80
Rated peak withstand current kA 50,63,80
Rated short-time withstand current (4s) kA 20,25,31.5
Case protection class IP4X
Overall dimensions (W×D×H) Vacuum breaker cabinet mm 1400×2800×2600
SF6 short-circuit cabinet

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “KYN61-40.5 Armouring Removable AC Metal Enclosed Switchgear”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Các câu hỏi thường gặp

LBAJI cung cấp những loại thiết bị đóng cắt nào?

LBAJI cung cấp:

Tủ điện trung thế:

  • Tủ điện bọc kim loại KYN28A
  • Tủ RMU (Ring Main Unit)
  • Tủ đóng cắt dòng XGN

Tủ điện hạ thế:

  • Tủ điện GGD
  • Tủ điện GCS
  • Tủ điện trung thế MNS / Tủ đóng cắt MNS
  • Tủ điều khiển MCC
  • Tủ phân phối
Tủ điện của quý vị có các cấp điện áp nào?

Các giải pháp thiết bị đóng cắt của chúng tôi bao gồm:

Trung thế:

  • 6kV
  • 10kV
  • 11kV
  • 12kV
  • 24kV
  • 35kV

Điện áp thấp:

  • 400V
  • 415V
  • 480V
  • Mức điện áp tùy chỉnh
Bạn có thể cung cấp các hệ thống tủ điện đóng cắt hoàn chỉnh không?

Vâng.

LBAJI cung cấp các giải pháp hoàn chỉnh bao gồm:

  • Tủ điện tổng vào
  • Các lộ ra
  • Tấm bảo vệ
  • Tủ điện đo đếm
  • Bảng điều khiển
  • Hệ thống truyền thông SCADA

Chúng tôi có thể cung cấp một gói hoàn chỉnh dựa trên thiết kế phân phối điện của bạn.