Transformer dielectric test package planning decides whether insulation evidence is usable—or just a stamp on a shipping folder.
Buyers who leave sequence and limits out of the RFQ often argue on the factory floor with incomplete reports. This guide covers what to specify, what to witness, and which documents to keep.
Write the dielectric plan before production milestones lock.
Part 1. When dielectric testing enters the purchase package
Dielectric testing appears when specifications, utility rules, or risk reviews demand insulation quality evidence beyond a marketing statement.
Late requests collide with production and freight calendars.
For broader witness and document checklists, start with the FAT importer witness checklist و قائمة التحقق من استعلام الأسعار (RFQ) لمحول الطاقة.
مهم: Do not treat a pass stamp as dielectric acceptance. Lock sequence, voltage basis, and report fields before the factory schedule freezes (IEC 60076-3).
Part 2. RFQ fields that make dielectric bids and reports comparable
Ask suppliers to quote against the same dielectric package.
| بند طلب عرض أسعار | لماذا يهم الأمر | أرسل مع اقتباس |
|---|---|---|
| Dielectric sequence and acceptance basis | Makes reports comparable | نعم |
| مجموعة القدرة المقدرة بالـ كيلو فولت أمبير والجهد الكهربائي | Defines the tested object | نعم |
| مجموعة المتجهات ونطاق الحنفية | Electrical identity of the unit | نعم |
| فاقد الحمل واللا حمل | Completes the rating package | نعم |
| طريقة التبريد والغلاب | Test object configuration | نعم |
| ممانعة القصر الدائري | Protection package alignment | نعم |
State whether witnessing is required and which report fields are mandatory.
Part 3. Sequence, voltage basis, and ambient conditions
Method language and voltage bases must match the governing specification.
Ambient notes and instrument identity belong in the report, not in hallway conversation.
Reject incomplete sequence descriptions before travel is booked.
Part 4. Witness scope and record discipline
Witness value comes from observing setup, reviewing readings, and confirming the report package.
A sticker without traces and conditions is weak evidence.
Define who can accept or reject on the day.
Part 5. How dielectric tests tie to the wider FAT list
Dielectric tests sit beside routine and special tests; do not treat one result as a substitute for the full FAT list.
Keep the sequence and hold points in one controlled schedule.
Align shipping release with document completeness, not optimism.
Part 6. Shortlist series after the test plan is written
توصية المنتج: After the dielectric plan is written, open the فئة منتجات المحولات and screen the سلسلة محولات الجاف المعزولة بالراتنج SC(B) و سلسلة محولات الطاقة المغمورة بالزيت S□-M against the approved ratings and test scope.
| ملائمة أفضل | يحتاج إلى مزيد من الدراسة |
|---|---|
| Sequence and limits in the RFQ | Pass stamps without report fields |
| Witness hold points scheduled | Dielectric requests after production ends |
| Full FAT package aligned | Treating one test as the only insulation proof |
Submit ratings and test notes through اتصل بنا لتأكيد الكتالوج.
Part 7. Dielectric-acceptance mistakes that delay shipment
- Requesting dielectric witnessing after the factory schedule freezes.
- Accepting reports without voltage basis or ambient notes.
- Omitting sequence language from the purchase order.
- Confusing dielectric tests with routine ratio-only checks.
- Releasing shipment before document checks close.
- Changing acceptance limits after witnessing starts.
الأسئلة الشائعة
When should a dielectric test package be in the RFQ?
Whenever the specification or risk review requires dielectric evidence—write it before production milestones lock.
Is a pass stamp enough for acceptance?
No; keep sequence, voltage basis, conditions, and readings in the controlled report package.
Do dry type and oil immersed use the same dielectric language?
Both need a named package, but details follow the governing specification for the technology and rating.
Which rating data still belong with a dielectric package?
Include kVA/voltage, vector/tap, losses, cooling/enclosure, and impedance so the tested object is unambiguous.
Should dielectric tests replace other FAT items?
No—they complement the routine and special package; keep the full hold-point list.
Who decides accept or reject on witness day?
Name the authority in the purchase documents before travel.
What should buyers send suppliers?
Send dielectric sequence expectations, report fields, ratings, and witness needs with the RFQ.
